POLY WAX
RELEASE AGENTS
- Fiberglass reinforced composites
- Cultured marble & solid surface
- Polyurethane foams & elastomers
- Friction materials industry
- Rubber molding
- Thermoplastics
POLYWAX 2-2019
A semi-slurry, low-cost wax formulation based on carnauba wax. This product is designed for applications in industrial molding where achieving a high-gloss finish is not a priority. Its properties make it suitable for large molds, likely due to its balance of affordability, ease of application, and sufficient release performance for such use cases.
DownloadPOLYWAX 777
A paste wax formulated with carnauba wax, designed specifically for applications requiring easy release properties and high-gloss finishing. Its features suggest it is ideal for: Mold release applications where a polished, high-gloss surface is desirable. Scenarios where the surface finish of the molded product is critical, such as in automotive, marine, or composite industries. This wax likely provides excellent durability and smooth application, thanks to the high-quality carnauba wax content, which is known for its superior hardness and shine. Let me know if you'd like detailed recommendations for its use or comparisons to other similar products.
DownloadPOLYSOLVE RELEASE AGENT
1840-18100
Polysolv Release Agent 1840-18100 is designed as a Solvent based mold release agent for thermosetting resins. Polysolv Release Agent 1840-18100 is a mix of special waxes and synthetic resins in solvent. It provides a durable film capable of giving excellent release and lubrication per application. Polysolv Release Agent 1840-18100 is especially suitable for the production of pipes in the filament winding- and centrifugal piping process. (Epoxy, Polyester), but is also used for polyester concrete parts & Fiberglass.
DownloadPOLYWAX CLEANER 717
A Mold Cleaning Liquid for aggressive semi-permanent release systems typically consists of blended solvents designed to dissolve and remove mold release agents, oils, resins, and other contaminants from molds. These solvents are formulated to break down the build-up of release agents while ensuring they do not harm or degrade the mold surface.
DownloadPOLYWAX SEALER 914
''Wipe on - wipe off". For all types of release requires polish step. Polywax Sealer 914 is a high durability semi-permanent base coat designed for use on composite, glass, aluminum and steel mold or plug substrates. Seals the mold surface and fills micro-porosity to create a smooth high gloss surface. Recommended for most molding processes including contact molding, hand lay up, spray up, cast polymer and closed molding.
DownloadPMR 910
'Wipe on - wipe off'. For all types of release requires polish step. Polywax PMR 910 is s designed to release gel coated polyester, vinylester or epoxy parts from most substrates, including metal or gelcoated mold surfaces yielding a streak free high gloss cosmetic finish. Simple wipe on/leave on application, yields class "A" finishes and multiple releases per application with minimal mold build up. Can be used with most molding processes. Only use Polywax PMR 912/910 after mold surface has been cleaned and prepared with Polywax Sealer 914. For application to molds at temperatures of 70°F (21°c) - 1so°F (71°c).
DownloadRELEASE AGENT FIBERLINE 409K301
For materials like Particle Board, Oriented Strand Board (OSB), Medium-Density Fiberboard (MDF), and PMDI (Phenol - Formaldehyde Modified with Isocyanate) boards, a specialized release agent is used to ensure smooth separation during the manufacturing process. These release agents help reduce friction, prevent sticking, and protect both the mold and the board surfaces. Here are key characteristics of the specialized release agents for these materials.
DownloadMOLD WIZ 128
Mold Wiz-128 is designed as a water based mould release agent for thermosetting resins. Mold Wiz-128 is a mix of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent release and lubrication per application. Mold Wiz-128 is especially suitable for the production of pipes in the filament winding- and centrifugal piping process. (Epoxy, Polyester), but is also used for polyester concrete parts & Fiberglass Lamination.
DownloadPVA (POLY VINYL ALCOHOL)
Poly Vinyl Alcohol (PVA) is suitable for treating molds made of Glass Fiber Reinforced Resin (GFRR). PVA acts as an effective release agent to prevent the resin or composite material from sticking to the mold surface during the curing process.
DownloadADDITIVE G 161 X
A silicone-free internal release agent for pultrusion is designed to facilitate the easy release of composite parts from the pultrusion mold while avoiding the use of silicones. This is particularly important for applications where the presence of silicone may interfere with subsequent processes like painting, bonding, or adhesive application.
Download
